TFCFL 2600W 58CC Gas Powered Chainsaw 2-Stroke Petrol Gasoline Bar Chain Saw

"Features:
- Sharp to cut the twigs . branches . bushes . shrubs and trees.
- Good-quality slip-resistant . comfort grip handle . comfortable and easy for cutting wood . effective to increase working efficiency.
- Waterproof and rustproof . easy to clean with water . durable for long-lasting use.
- Good for sawing . cutting . pruning and trimming wood.
- Perfect tool for gardening . wordworking . landscaping.
Structure chart:
Guide chain installation step diagram:
Step1: Install the guide plate
Step2: Install the chain
Step3: Align the holes to install the side cover and screw on the nut
Step4: Adjust the tightness of the chain
Step5: Sleeve lock nut
Fuel injection volume can be adjusted
Step1:
Add engine oil. The function of engine oil is to lubricate the chain . so you must wait for the oil to spray out before you can go to the tree.
Step2:
Add gasoline. The ratio of gasoline to oil is 25:1 or 20:1 . 20:1 is recommended (must be two-stroke oil . and Mobil two-stroke oil is recommended). Do not use four-stroke engine oil or other engine oil . otherwise it will easily cause cylinder pulling or other problems.
1. Pull up the flameout switch
2. Pull out the damper
3. Pull the start handle
Pull the start handle 3-6 times. When you hear the machine banging . push the damper back in . otherwise the machine will not start.
4. Close the damper
Turn off the air door . pull the start handle 1-3 times again . you can start normally
Gross weight: 6.5kg
Size: 58*27*33cm
Package includes:
1 xHand saw
1 xFunnel
1 xProportioning pot"