TFCFL 24" 72cc Gasoline Chainsaw Cutting Wood Gas Sawing Crankcase Chain Saw
Please kindly noted that this item is sold by WUPENGYIHOME from Joybuy marketplace.
Specification
Material: Manganese Steel . Rubber
Power Type: Gasoline
Color: Orange
Process: Quenching
Assembly Required: Yes
Power Source: Gas Powered
Ignition System: Hand Pull Start
Engine Type: Single Cylinder . Air-cooled . 2-Stroke
Oil Mixture: 25:1(Gasoline: Oil)
Chain Length: 60.96cm/24inch
Displacement: 72cc
Tank Capacity: 0.77L/26oz
Speed: 2700rpm
Chain Fuel Tank Capacity: 0.42L/14oz
Power: 3.9kw
Maximum Cutting Diameter: 58cm/28.33in
Net Weight: 8.5kg/18.74 1bs
Gross Weight: 9kg/19.841bs
Package Size: 56*26*38cm/22.05*10.24*14.96in
Product Size: 104*27*33cm/40.94*10.62*12.99in
Starting Method:
1. Fill fuel and chain oil tanks respectively .and tighten the caps securely.
2. Put the switch to "I" position
3. While holding the throttle lever together with the throttle interlock . push in the side throttle lock button and release the throttle lever to hold it at the starting position.
4. Pull out the choke knob to the closed position.
5. While holding the saw unit securely on the ground .pull the starter rope vigorously.
6. When engine has ignited first .push in the choke knob and pull the starter again to start the engine
7. Allow the engine to warm up with the throttle lever pulled slightly.
How to Assemble the Chainsaw:
1. Pull the guard towards the front handle to check that the chain brake is not on.
2. Loosen the nuts and remove the chain cover.
3. Install the attached spike to the power unit.
4. Gear the chain to the sprocket and . while fitting the saw chain around the guide bar . mount the guide bar to the power unit. Adjust the position of chain tensioner nut on the chain cover to the lower hole of guide bar.
"