62 cc 2 Stroke Gasoline Chainsaw 20" Bar Powered Engine Wood Cutting Gas Chain Saw

Unlike electric chainsaw tools . this electric gas oil chainsaw require gasoline . support powerful & high effcient.The saw is waterproof and rustproof . easy to clean with water. With exceptional hardness and durability . fast cutting . more durable and high wear resistance . not easy to drop chain . having a longer using life.This chain saw is sharp to cut the twigs . branches . bushes . shrubs and trees. Perfect tool for gardening . woodworking . landscaping.

Features:

• Ergonomic Design:The comfortable handle design . non-slip and shock-absorbing . not easy to fatigue for a long-term use . making this chainsaw balanced . maneuverable . and comfortable to operate . use more securely.
• Slip Resistant: Good-quality slip-resistant . comfort grip handle . comfortable and easy for cutting wood . effective to increase working efficiency.
• Powerful Engine: 62 cc gas engine for cutting wood that need a longer bars .integrated chain brake for safety and stable while operating.The engine speed can be up to 15000 rpm.
• High Quality Chains: A 20-inch bar and low-rebound chain can cut the hardest wood quickly and easily.
• Pitch: 0.325 inch.
• Sprocket: 7T*0.325''.
• Chain width: 0.058''
• Power: 2600W.
• Gas Displacement: 62cc（cm3）.
• Rotating Speed: 12500（rpm）.
• Highest Speed Chain: 15000（m/s）.
• Fuel capacity: 550 (ML); Oil capacity: 260（ML）
• Voltage: 12 V
• Size: 58*27*33cm

Guide chain installation step diagram:

1. Install the guide plate
2. Install the chain
3. Align the holes to install the side cover and screw on the nut
4. Adjust the tightness of the chain
5. Sleeve lock nut

Fuel injection volume can be adjusted:

• Step1: Add engine oil. The function of engine oil is to lubricate the chain . so you must wait for the oil to spray out before you can go to the tree.
• Step2: Add gasoline
• The ratio of gasoline to oil is 25:1 or 20:1 . 20:1 is recommended (must be two-stroke oil . and Mobil two-stroke oil is recommended). Do not use four-stroke engine oil or other engine oil . otherwise it will easily cause cylinder pulling or other problems.
• 1. Pull up the flameout switch
• 2. Pull out the damper
• 3. Pull the start handle. (Pull the start handle 3-6 times. When you hear the machine banging . push the damper back in . otherwise the machine will not start.)
• Close the damper. (Turn off the air door . pull the start handle 1-3 times again . you can start normally)