52CC 10-in-1 Gas String Trimmer 2-Stroke Brush Cutter Straight Shaft Weed Eater
Specification
Color: Red
Material: Aluminum Alloy . Pp . Manganese Steel
Irrigation Cutter Model: Mt520
Engine Mode: 1e44f-5
Carrying Type: Side-attached
Power Source: Gas Powered
Engine Power: 1.7kw . 6500-8500r/Min
Engine Type: Air-cooled . 2-Stroke . Single-cylinder Gasoline Engine
Engine Displacement: 52cc
Carburetor Type: Pump Membrane Type
Idling Speed: 2800-3200r/Min
Fuel Tank Capacity: 1000ml/0.9qt
Gasoline / Circulating Oil Mixture Ratio: 25:1
Noise: 110db
Blade Diameter: 25cm/9.8in
Hedge Cutting Length: 45cm/17.7in
Long Rod Saw Length: 30cm/11.8in
Net Weight: 15kg/ 33lbs
Product Size: 105*25*25cm/41*9.8*9.8in
Package Size: 107*28*28cm/42*11*11in
Assembly Required: Yes
Key Features
Powerful Engine: with a Powerful 1.7kw 52cc Engine . It Can Provide You with More Power (6500-8500r/Min).
Space Saving: the Various Parts of This Mower Can Be Disassembled.
Thoughtful Protection: It Contains Shock-absorbing Shoulder Straps and Ear Protection Goggles.
Stable Cutting: the Control bar of the Weed Eater Is Equipped with a High-quality Rigid Aluminum bar.
Multifunctional: Our Product Includes 7 Types of Heads . Namely Aluminum Weeding Rope . 3t/4t/8t/80t/40t Saw Blade . and 2t Diamond Blade.
How to Use
Please Must Use Mixed Fuel . the Ratio of Oil to Gasoline 1:25. (Can Be Adjusted According to the Fuel Grade)
Add Mixed Fuel to the Fuel Tank . Do Not Add Too Full to Prevent Overflow. Press the Carburetor Oil Bubble to Pump Fuel Until the Oil Bubble Is Full and the Return Pipe Returns Fuel
Close the Damper Upward . and Make Sure the Flame Failure Switch Is in the Open State. (Hot Engine Start Does Not Need to Close the Damper)
Pull the Starter to Start and Then Open the Damper to Gently Accelerate the Warm-up. (in Winter When the Weather Is Colder . You Need to Close the Damper State Warm-up . Open the Damper After Warm-up)
Package Included
1*Carrying Strap
1*Long Pole Saw
1*Mower
1*Long Pole Hedge Trimmer
1*Mainframe
1*Grass Stopper
1*Funnel
1*Front Handle
1*Hedge Heating Head
4*Aluminum Haymaking Rope
1*80t Saw Blade
1*3t Saw Blade
1*4t Saw Blade
1*8t Saw Blade
1*40t Alloy Saw Blade
1*2t Diamond-shaped Blade
1*Goggles
1*Guide Plate
1*Chain
1*Guide Plate Sleeve
1* English Instructions
All Accessories for Assembly
Notes
Check Whether the Blade Is Firmly Installed Before Work and Whether There Are Loose Screws . Eliminate the Potential for Failure . Clean up the Workplace Debris Stones . and Other Items . and Wear Protective Equipment.
Please Check and Clean the Air Filter Sponge Every 20 Hours of Work . and Check Whether the Gearbox Is Lack Grease.
When the Blade Fixed Gap Is Greater than 0.03in . Please Replace a New Blade. Insufficient Power . Unstable Idle Speed . Cold Engine Start Difficulty . Please Try to Replace the Spark Plug.
Please Recommend Every 50 Hours of Work for Comprehensive Maintenance of the Whole Machine to Improve Efficiency and Service Life . Use Water-diluted Detergent to Clean the Air Filter Sponge . and Dry Enough to Reinstall.
If Not in Use for a Long Time . Please Pour out Engine Oil and Gasoline . and Clean the Spark Plugs During Preheating and Reinstallation. Please Start the Engine to Burn off the Residual Fuel in the Carburetor . and Use the Mixed Fuel As It Is . Do Not Use the Mixed Fuel for More than 7 Days to Avoid Damaging the Engine.
"