TFCFL 24" 72cc Gasoline Chainsaw Cutting Wood Gas Sawing Crankcase Chain Saw

Please kindly noted that this item is sold by WUPENGYIHOME from Joybuy marketplace.

Specification

Material: Manganese Steel . Rubber

Power Type: Gasoline

Color: Orange

Process: Quenching

Assembly Required: Yes

Power Source: Gas Powered

Ignition System: Hand Pull Start

Engine Type: Single Cylinder . Air-cooled . 2-Stroke

Oil Mixture: 25:1(Gasoline: Oil)

Chain Length: 60.96cm/24inch

Displacement: 72cc

Tank Capacity: 0.77L/26oz

Speed: 2700rpm

Chain Fuel Tank Capacity: 0.42L/14oz

Power: 3.9kw

Maximum Cutting Diameter: 58cm/28.33in

Net Weight: 8.5kg/18.74 1bs

Gross Weight: 9kg/19.841bs

Package Size: 56*26*38cm/22.05*10.24*14.96in

Product Size: 104*27*33cm/40.94*10.62*12.99in

Starting Method:

1. Fill fuel and chain oil tanks respectively .and tighten the caps securely.

2. Put the switch to "I" position

3. While holding the throttle lever together with the throttle interlock . push in the side throttle lock button and release the throttle lever to hold it at the starting position.

4. Pull out the choke knob to the closed position.

5. While holding the saw unit securely on the ground .pull the starter rope vigorously.

6. When engine has ignited first .push in the choke knob and pull the starter again to start the engine

7. Allow the engine to warm up with the throttle lever pulled slightly.

How to Assemble the Chainsaw:

1. Pull the guard towards the front handle to check that the chain brake is not on.

2. Loosen the nuts and remove the chain cover.

3. Install the attached spike to the power unit.

4. Gear the chain to the sprocket and . while fitting the saw chain around the guide bar . mount the guide bar to the power unit. Adjust the position of chain tensioner nut on the chain cover to the lower hole of guide bar.